Belt cutting machine for sleeve Rubber or Polyurethane Timing Belts and Ribbed multi V Poly-V and Banded V-Belts. The machine must be positioned in a dry place protected from the rain with minimum space of: 3×3,5×2 (WxLxH in meters) and weight 250Kgs. The belt cutting machine is delivered fully calibrated, allowing you to start cutting immediately after beeing sure the machine is well positioned. The speed regulation will allow to vary the speed from 100 – 300 rpm. The machine has a digital read-out of the cutting width.
The belt cutting machine is designed to be connected to the 230/400Vac 50 Hz power supply. If the machine is supplied with the speed regulation (inverter inside), the connection is monophase 220 V, 50Hz (110 V for USA market). If the machine is equipped with the inverter, you can adjust the speed with the potentiometer.
The belt cutting machine is standard packed on a pallet, that is included in the price. In case other packing is needed, it has to be quoted apart. The machine is very easy to maintain. It is advisable to keep it clean and to lubricate the linear guide 4 times per year. The bearings and the gearbox do not need any maintenance. Also the inverter is without maintenance and does not need any calibration from the customer side.
If you want to know more details about belt slitting machine or belt cutting machine, please feel free to contact HOLO.
Copyright © WENZHOU HOLO INDUSTRIAL EQP MFG CO., LTD
All Rights ReservedSitemap