Ultra-Light Modular Rubber Conveyor Belt Vulcanizing Press

Pressure & Temperature‑control Performance

  1. Maximum working pressure up to 200 PSI (1.4 MPa) for stable pressure output, meeting pressure requirements for conveyor‑belt joint vulcanization. Equipped with pressure‑relief valve for automatic over‑pressure protection to avoid unsafe over‑pressure operation.
  2. Max controlled temperature 165 °C (325 ℉), matching standard vulcanizing temperature for rubber conveyor belts. Paired with dedicated temperature‑control box for precise temperature regulation, protecting heating platens and heating elements to extend service life.
  3. Pressure‑bag pressing system. Multiple heating platens can be assembled and operated in parallel. Combinations of different‑size platens are available to suit vulcanization of belts with various widths.

Safety‑protection Design

  1. Multi‑level safety structure: Fitted with safety pins and spindle protection mechanism to stop components from ejecting if bolts fail and prevent crushing hazards. Deformation or cracks on load‑bearing parts can be visually inspected for early risk detection.
  2. High‑temperature warning protection: Operating temperature of platens exceeds 145 °C with clear burn‑hazard instructions. Water‑cooling may generate steam; regulated piping setup prevents steam scald injuries.
  3. Electrical‑safety compliance: Maintenance of electrical components shall be performed by licensed qualified electricians. Mandatory earthing protection against electric shock. Operation in humid environments is forbidden to prevent short‑circuit and fire risks caused by damaged cables.

Assembly & Operational Advantages

  1. Modular assembly structure: Step‑by‑step installation sequence: bottom beams → lower heating platen → belt sample → upper heating platen → pressure bag → top beams. Fast assembly & disassembly. Different‑size heating platens can be stagger‑matched for non‑standard vulcanizing widths.
  2. Water‑cooling system enables rapid post‑cycle cooling and reduces waiting time to improve on‑site working efficiency.
  3. Matched dedicated hydraulic pressure pump connected via separate pressure hose. Continuous external pressure source is prohibited for on‑site operational safety.

Application Scenarios

Specially designed for hot‑vulcanized splicing of rubber conveyor‑belt joints, suitable for on‑site belt repair and joint fabrication in mining & industrial sites.

Application Areas

 


Technical Specifications

 

Model NumberBelt WidthPlate DimensionsCross BeamPowerQuantity of Cross BeamBias Angle
100p.s.i.200p.s.i.
68066800950*6801230*165*17086817.3°
68086800950*8501230*165*170981017.3°
68010800950*10101230*165*17011101217.3°
6106610001160*6801440*165*170106817.3°
6108310001160*6801440*165*1701281017.3°
6101010001160*10101440*165*17014101217.3°
6126612001380*6801660*165*250116817.3°
6128312001380*8501660*165*2501481017.3°
6121012001380*10101660*165*25017101217.3°
6146614001600*6801880*165*250136817.3°
6148314001600*8501880*165*2501681017.3°
6141014001600*10101880*165*25019101217.3°
6166616001900*6802180*165*250136817.3°
6168316001900*8502180*165*2501981017.3°
6161016001900*10102180*165*25023101217.3°
6186618002100*6802400*165*320176817.3°
6188318002100*8502400*165*3202181017.3°
6181018002100*10102400*165*32025101217.3°
6206620002300*6802600*165*320186817.3°
6208320002300*8502600*165*3202381017.3°
6201020002300*10102600*165*32028101217.3°
6226622002500*6802800*165*320216817.3°
6228322002500*8502800*165*3202581017.3°
6221022002500*10102800*165*32030101217.3°

 


Why Choose HOLO

HOLO provides high-quality conveyor belt vulcanizing equipment and professional technical solutions to help customers reduce conveyor belt maintenance time and extend belt service life.

  • Reliable vulcanizing performance for industrial applications
  • Custom solutions based on on-site working conditions
  • CE-certified equipment for international markets
  • Professional installation guidance and technical support
  • Operator training and after-sales service available
  • Custom sizes and configurations supported

Quality Control & Factory Inspection

Every vulcanizing press undergoes strict inspection before shipment, including:

  • Heating plate temperature uniformity testing
  • Pressure system inspection
  • Electrical safety and control system testing
  • Structural assembly and operational testing
  • Final quality inspection before delivery

After-Sales Service & Support

Warranty: 1 year

Technical Support: Online technical consultation and troubleshooting

Service Scope: Installation guidance, commissioning, and operator training

Customization: Special belt widths, voltages, and configurations available


FAQ & Support

Q1: What types of conveyor belts can this vulcanizing press handle?
A: It is suitable for fabric conveyor belts, steel cord belts, and solid woven belts.

Q2: What is the maximum splicing width?
A: The maximum single-machine splicing width is up to 3000 mm.

Q3: What voltage options are available?
A: Available voltages include 220V, 230V, 380V, 400V, 415V, 440V, 460V, 480V, and 660V.

Q4: Is the machine CE certified?
A: Yes. The complete machine complies with CE certification standards.

Q5: Can HOLO provide customized solutions?
A: Yes. We can customize vulcanizing equipment according to different site conditions and application requirements.

 

 

Get a Quote

    ✕

    Get a Quote

      ✕

      Download Catalog