WK Vulcanizing Press for Rubber Conveyor Belt
Key Features
- Compact and lightweight vulcanizing press for fabric-reinforced conveyor belts
- Designed for hot vulcanization of low and medium tensile strength belts
- Faster heating and cooling cycles to reduce splicing time
- Lower energy consumption compared to conventional vulcanizing presses
- Belt-friendly low-temperature vulcanization around 120°C (230°F)
- Simple structure with only four main components for easy operation
- Suitable for splice geometries of 0°, 16°, and 22°
- Available for belt widths from 800 mm to 1200 mm
- Compatible with single-phase and three-phase power supply
- Ideal for on-site conveyor belt maintenance and repair work
For belt type, belt width, voltage requirements, and splice configuration, please contact us for customized solutions.
Technical Specifications
| Model | Ref. No. | Heating PlateSize | Weight of Top PressBody | Weight of Bottom PressBody | Power/Wattage | PowerSupply |
|---|---|---|---|---|---|---|
| TW-Press 600 | 565 3007 | 660x330mm | 42kg | 58kg | 2×1.0kW | 230V-50Hz |
| TW-Press 800 | 565 3107 | 815x330mm | 48kg | 65kg | 2×1.2kW | 230V-50Hz |
| TW-Press 900 | 565 3117 | 915x350mm 915x400mm | 53kg | 79kg | 2×1.5kW | 230V-50Hz |
| TW-Press 1000 | 565 3127 | 1015x350mm 1015x400mm | 58kg | 79kg | 2×1.85kW | 230V-50Hz |
| TW-Press 1000 | 565 3137 | 1115x470mm 1115x350mm | 65kg | 78kg | 2×2.4kW | 230V-50Hz |
| TW-Press 1200 | 565 3147 | 1350x470mm 1320x350mm | 85kg | 100kg | 2×3.2kW | 415V-50Hz |
Why Choose HOLO
HOLO WK vulcanizing presses are designed for efficient, low-temperature conveyor belt splicing with reduced energy consumption and shorter downtime.
The lightweight and simplified structure helps operators complete hot vulcanization work faster while maintaining stable splice quality.
- Compact and easy-to-handle design
- Faster operation with shorter heating and cooling time
- Reduced power consumption for cost-efficient operation
- Low-temperature vulcanization protects conveyor belts
- Reliable splicing performance for fabric-reinforced belts
- Simple operation and easy maintenance
Quality Control & Factory Inspection
Every WK vulcanizing press is inspected before shipment, including:
- Heating temperature verification
- Pressure system inspection
- Electrical safety and control testing
- Structural and operational testing
- Final quality inspection before delivery
After-Sales Service & Support
- Warranty: 1 year
- Technical Support: Online troubleshooting and technical consultation
- Service Scope: Installation guidance and operator training
- Spare parts and maintenance support available
- Custom voltage and configuration options supported
FAQ & Support
Q1: What conveyor belts can the WK vulcanizing press handle?
A: It is suitable for fabric-reinforced conveyor belts with low and medium tensile strength.
Q2: What belt widths are available?
A: WK 800 supports belt widths up to 800 mm, and WK 1200 supports belt widths up to 1200 mm.
Q3: What is the operating temperature range?
A: The operating temperature range is approximately 110°C to 150°C.
Q4: Does the WK press reduce energy consumption?
A: Yes. The compact heating system significantly reduces power consumption compared to traditional vulcanizing presses.
Q5: Is the machine easy to transport and operate?
A: Yes. The lightweight structure and simplified four-component design make it easy to transport and use on-site.